http://www.homeadvisor.com/cost/roof...losing-article

Change the Location to get your area.

Price is in the ballpark for this area. :)

Question !
I had to do 2 units of a quad-plex today and I had a hard time in figuring out which outside ac unit went where.
All four of the outside ac units were all together .
They all ran into one chase in the wall at the end of the building.
Without being labeled how would you know which one was the one I was looking for ? They all had independent disconnects ...
Dang it !
I know about turning the thing off.
But some were running and the others not.
And yes! My units were on the second floor, So! Turn it off run down stairs around the complex just hoping when I got there 3 were running and one was off.
Didn't I wish .
I tried the ol' Sherlock Homes deduction but that didn't help.
There was no one at home in the other 2 units ...

Then comes along a dude in a golf cart with a big chunk chewing tobacco in his mouth and said !
What the hell are you doing ?
Now ! I'm sweating like a Hebrew slave and don't really feel like talkin'.
But ! I said .. I'm trying to figure out which of there gal darn compressors go to where .
He had the nerve to call me a dumb a s s ( at that moment I really thought about murder)but , I said alright Smarty where do they go ?
It was written on the back side of the disconnect lids.
Yep ! I'm a Dumb A S S !

If I didn't have that guy how would it be done?

Motto of this story.
Ask the friggin' maintenance man !

PS: I violated the cardinal rule .
I got in a hurry .
Yep ! I wanted to hurry back and see what foolishness they were accusing Nathan about .
Not !

:shock::shock:
Attached Thumbnails  

Does anyone have some good illustrations or photos of kick out flashing properly installed where a roof meets the wall? I need a photo or illustration of kick out flashing with vinyl siding & J channel, and wood siding,

Freebies, deals, and discounts pack shipped right to your door. $7.00 shipping and handling for U.S. and Canada.

http://www.inspectoroutlet.com/deals-and-discounts.aspx

Note: Each packet also includes a copy of the latest edition of the Now That You've Had a Home Inspection book.

EnergyLogic is excited to announce our 5th annual RaterFest! retreat, which will take place on September 13 – 15, 2013 near Black Hawk, CO. This incredible 2.5 day conference is located in the beautiful Colorado Rockies, and lodging, organic/local meals, and presentations/CEU’s are included! Given our relationship with InterNACHI, EnergyLogic is extending a great discount to InterNACHI members – $50 off the event registration. Please use discount code RFNACH when checking out on our event website to take advantage of this special offer.

RaterFest! Overview:
RaterFest! is an incredible retreat that provides attendees with a focused opportunity to learn, network, and swap stories with fellow Energy Professionals from across the country. Nestled amongst the beautiful Colorado Rocky Mountains, this conference features a full slate of rigorous sessions in a low-key, intimate learning environment. Attendees can expect a great weekend, full of enlightening and rewarding conversations both in and out of sessions. Hiking, campfires, organic/local meals, local brews, and panoramic mountain views make this retreat one you will want to attend year after year. We work hard to make it fun and enriching for everyone!

This year, RaterFest! will include 12+ sessions led by the industry’s best and brightest – including presentations by such seasoned presenters and industry leaders as:
·Mark LaLiberte – Construction Instruction
·Sam Rashkin – US Department of Energy
· Paul Morin – Energy Conservatory
You can see all of our presenters and read their bios here.

EnergyLogic is excited to announce our 5th annual RaterFest! retreat, which will take place on September 13 – 15, 2013 near Black Hawk, CO. This incredible 2.5 day conference is located in the beautiful Colorado Rockies, and lodging, organic/local meals, and presentations/CEU’s are included! Given our relationship with InterNACHI, EnergyLogic is extending a great discount to InterNACHI members – $50 off the event registration. Please use discount code RFNACH when checking out on our event website to take advantage of this special offer.

RaterFest! Overview:
RaterFest! is an incredible retreat that provides attendees with a focused opportunity to learn, network, and swap stories with fellow Energy Professionals from across the country. Nestled amongst the beautiful Colorado Rocky Mountains, this conference features a full slate of rigorous sessions in a low-key, intimate learning environment. Attendees can expect a great weekend, full of enlightening and rewarding conversations both in and out of sessions. Hiking, campfires, organic/local meals, local brews, and panoramic mountain views make this retreat one you will want to attend year after year. We work hard to make it fun and enriching for everyone!

This year, RaterFest! will include 12+ sessions led by the industry’s best and brightest – including presentations by such seasoned presenters and industry leaders as:
·Mark LaLiberte – Construction Instruction
·Sam Rashkin – US Department of Energy
· Paul Morin – Energy Conservatory
You can see all of our presenters and read their bios here.

EnergyLogic is excited to announce our 5th annual RaterFest! retreat, which will take place on September 13 – 15, 2013 near Black Hawk, CO. This incredible 2.5 day conference is located in the beautiful Colorado Rockies, and lodging, organic/local meals, and presentations/CEU’s are included! Given our relationship with InterNACHI, EnergyLogic is extending a great discount to InterNACHI members – $50 off the event registration. Please use the discount code RFNACH when checking out on our event website to take advantage of this special offer.

RaterFest! Overview:
RaterFest! is an incredible retreat that provides attendees with a focused opportunity to learn, network, and swap stories with fellow Energy Professionals from across the country. Nestled amongst the beautiful Colorado Rocky Mountains, this conference features a full slate of rigorous sessions in a low-key, intimate learning environment. Attendees can expect a great weekend, full of enlightening and rewarding conversations both in and out of sessions. Hiking, campfires, organic/local meals, local brews, and panoramic mountain views make this retreat one you will want to attend year after year. We work hard to make it fun and enriching for everyone!

This year, RaterFest! will include 12+ sessions led by the industry’s best and brightest – including presentations by such seasoned presenters and industry leaders as:
·Mark LaLiberte – Construction Instruction
·Sam Rashkin – US Department of Energy
· Paul Morin – Energy Conservatory
You can see all of our presenters and read their bios here.

Hey all. I've read about legislation to set-up a Board for Home Inspector's.
Do I understand it correctly that there currently is no licensing requirement in MO?
I am currently a licensed LA inspector, but am from the Kansas City area.
Just curious how it works for inspectors back home.

6-11-13

I just realized my Level I certification with ITC is up in a few months. Got on their web site and see there are several ways to recertify:

I don't see paying another $1,850 to retake the course:
I don't see me paying $595 to retake the certification exam.
I don't see me writing 2 papers on IR for trade journals.
I don't see me paying $1,595 to attend their annual whoopee-do.

SO .................................................. ............
__________________________________________________ ______


All certifications, including renewed certifications, are valid for five years.
Thermography Recertification Requirements

There are two ways to extend your thermography certification level:

• Attend another ITC certification course
• Show continued involvement in thermography as outlined below:
  • Show proof of continuous employment requiring thermographic work over the current certification period, plus earn 32 recertification credits in any combination of the following activities:
    • Present a technical paper on infrared at a thermography conference (16 credits per paper). Submit a copy of the technical paper with a recertification form and fee of $145*.
    • Publish an article on infrared for a technical trade journal, industry magazine, or the ITC InfraMation newsletter (16 credits per paper). Submit a copy of the article with a recertification form and fee of $145*.
  • Attend sessions at a thermography conference or ITC application course (one credit per contact hour). Submit proof of attendance (with a verification form) at all sessions and send to ITC with a recertification form and fee of $145*.

Howdy to all inspectors across the nation!

My delema... I took the AHIT course back a few years ago once I finished the home study/online course I took the state test and did not pass I think I scored a 91.. I did take the professional course to work for myself. I kind of got discourage and put it on the shelf for a while.. then got back into it and done it a gain about a year later and still did not pass.. I think I got a 94.. I was suppose to get 120 right out of I think 180 or 150... I Had called AHIT to see if they could help me I figure I spent 1200 bucks that is the least they could do.. but I never got a response for them.. I tried to email them a few times and nobody seem to really want to help me... I was surprised I failed really I have been in contruction all my life did bathroom remodels and tile work for years.. I know that does not mean I know it all,, but I thought I would pass.....

So here is the delema.. I'm working drivng a truck now for over 2 years 14 hours a day make decent money, but I have no time to myself and I need to get back into my own business. I'm 56 it is hard to find a good paying job... it is hard to start a new career working for someone else.. I need to get my own business up and running... any advice from anyone ?

I already paid a good amount of money for the previous course.. does anyone know who might be able to help me... I'm not dumb or stupid I'm pretty smart actually. but for some crazy reason can't pass that state test.... I'm fustrated... I need to start my own business so I can have time to do my misssionary work once a year for a month... so I need to have flexibilty and make some good money too. Thanks everyone lord bless John

Apparently some people are having some trouble accessing my website. I realize I used a Mac-specific video style for my testimonials. I'm wondering if this was causing issues for PC users. I've pulled them off temporarily to see if this fixes the problem. Could someone check if my site still gets red-flagged by your spyware software? Thanks.

Being new to HI, I have a question for you seasoned professionals. While doing a maintenance job on a house, I noticed the customer's AC was connected directly to the nearby service panel, which I suppose is not an issue. But I also noticed it was served by a 20 amp breaker, while being listed for 30. Other than a tendency for the breaker to trip, is this a hazard or deficiency? Please give me a detailed explanation, since I am not fully versed on the subject. In advance, thank you!

http://waco-home-inspections.com

Snagged this pic from another forum...

H.O. was probably thinking that "a little water can't weigh that much. Can it?"


Jeff

Newer 2.5 Million dollar house had water intrusion. Seller had a receipt for $62,000 for water extraction and mold remediation done within a month.

Popular lab air quality tests came back fine, about 9 air samples, all clean and the only things visible were some minor water marks on cabinets.

All the work was done by a licensed and insured Mold Remediation company.

Should I recommend testing or just rely on their tests?

What say you?

Within the past few years the lenders have been requiring the appraiser to state if the utilities where on and working. I always state I am not a building inspector and cannot determine functional utility of all major components. My question is with regard to residential properties. I think I read somewhere that to test the heating component of a residential property it may need an outside temp below a certain degree. If so what is the industry standard? Is in line with the temp needing to be above 65 degrees for a cac unit?

Shower stall and sink. No toilet.
Attachment 65999
Attached Thumbnails  

List your top 5-10 deficiencies found on electrical panels. Lets see how many are common to a broad area and the differences by region.

Free home inspection training webinar:
"Finding Major Defects in a Home Inspection #3," on Thursday, June 20, 2013, 9:00 PM (EST).
Free and open to everyone.


This house (above) has several major defects, including a material defect as defined by the Standards of Practice. Join us as we inspect this house.

In this webinar, we're going to:

- inspect a 10-year-old home;
- follow the Standards of Practice; and
- find a few major defects.

Free home inspection training webinar:
"Finding Major Defects in a Home Inspection #3," on Thursday, June 20, 2013, 9:00 PM (EST).
Free and open to everyone.

Attachment 65996
This house (above) has several major defects, including a material defect as defined by the Standards of Practice. Join us as we inspect this house.

In this webinar, we're going to:

- inspect a 10-year-old home;
- follow the Standards of Practice; and
- find a few major defects.
Attached Thumbnails